ge ivent 201 ventilator
Click To Enlarge

Basic Description

  • Electrically powered, computer controlled ventilator
  • Closed loop flow & pressure controller
  • Ventilation modes:
    • Assist control (A/C):
      • Volume controlled
      • Pressure controlled
    • Synchronized intermittent mandatory ventilation (SIMV):
      • Volume controlled
      • Pressure controlled
    • Continuous positive airway pressure (CPAP)
    • Pressure support ventilation (PSV)
  • Special features:
    • Adaptive Bi-Level* (NIV)
    • Adaptive Flow*
    • Adaptive I-Time*
    • Preset parameters by patient weight
    • Apnea backup ventilation
    • Adjustable rise time
    • Easy Exhale*
    • Sigh breath
    • 100% O2 suction

Ventilation Performance and Controlled Parameters

  • Respiratory rate: 1 to 80 bpm
  • Tidal volume: 50 to 2,000 ml
  • Inspiratory pressure limit: 5 to 80 cm H2O
  • Inspiratory time: Adaptive I-Time* or 0.2 to 3 sec
  • Esens: 10-90%
  • Rise time: Mid/high/max/auto
  • Peak flow: Adaptive Flow* or 1 to 120 L/min; Spontaneous up to 180 L/min
  • Oxygen mix (FiO2): 21 to 100%
  • PEEP: 0 to 40 cm H2O
  • Trigger sensitivity: 1 to 20 L/min flow sensitivity –0.5, to –20 cm H2O pressure sensitivity
  • PSV: 0 to 60 cm H2O
  • Positive pressure relief valve: 80 cm H2O
  • Synchronized nebulizer: 5 to 240 min

Monitoring and Displayed Parameters

  • Airway pressure (analog bar graph & numerical)
  • Total breath rate
  • I:E ratio
  • Exhaled tidal volume
  • Exhaled minute volume
  • Peak flow
  • Inspiratory time
  • Electrical power source (AC/external DC/internal DC)
  • Battery level
  • Pressure, flow and volume Waveforms software package:
    • Real-time pressure and flow waveforms
    • Waveform history brows
  • Trending of monitored data (72 hours)
  • Respiratory mechanics (C, R, MAP, RR/Vt)
    • Pressure, flow and volume loops
  • SpO2

User Adjustable Alarms

  • Respiratory rate (high/low)
  • Minute volume (high/low)
  • Pressure (high/low)
  • Low Vt (15 to 85%)
  • SpO2 (high/low)
  • HR (high/low)
  • Apnea time (0 to 120 seconds)
  • FiO2 (high/low)
  • Leak (0 to 100%)

Additional Alarms:

  • Inverse I:E ratio
  • Low O2 pressure
  • AC disconnect
  • Low/Empty battery
  • Over temperature
  • Service notice
  • Patient disconnect
  • Check sensor
  • High PEEP
  • Battery disconnected / damaged
  • Sensor disconnect  

 

Additional Indicators:

  • Alarm silence icon and timer
  • Breath type icon
  • Internal battery use
  • Date and time
  • Hour meter
  • Battery charge level
  • Need calibration
  • LED: On, charge, alarm
  • Nebulizer status indicator

Size and Weight Dimensions

  • Height: 13”/33 cm
  • Width: 9.5”/24 cm
  • Depth: 10.3”/26 cm
  • Screen: 8.4” diagonal
  • Weight: 18.3 lb/8.3 kg (without battery)
  • Battery weight: 6.2 lb/2.8 kg
  • Overall weight with standard battery: 24.5 lb/11.1 kg
  • Overall weight with optional extended internal battery: 27.8 lb/12.6 kg

Power Supply

  • External AC: 100 to 240 V, 50 to 60 Hz, Max 1.6 A
  • External DC: 12 to 15 V, Max 8.5 A
  • Internal battery: Sealed lead-acid 12 V (7.8 Ah) (rechargeable)
  • Operating time: Depending on ventilator settings and impedance – standard internal up to 2 hours, optional extended internal up to 4 hours and optional external up to 8 hours.

Oxygen (Enrichment) Supply

  • High pressure supply: 40 to 75 psi (2.8 to 5.1 bar)
  • Low pressure: Max 15 L/min or 0.5 psi   

External Interface

  • Remote monitor (VGA)
  • RS-232 serial port, 9 pin
  • DIN keyboard connector
  • RJ11 remote alarm connector

Environmental Specifications

  • Operating temperature: 0 to 50° C/32 to 120° F
  • Storage temperature: –15 to 70° C/–4 to 140°F
  • Relative humidity: 15 to 95% at 30° C/85° F
  • Water/dust resistance: IP54 (splash proof)
  • Atmospheric pressure: 430 to 825 mm Hg (15,000 feet)
  • Vibration:
    • IEC 68-2-6 and IEC 68-2-34
    • MIL-STD-810E
  • Shock:
    • IEC 68-2-27 (100 g)
    • MIL-STD-810E
  • Total external sound level: 40 to 45 dBa at one meter

Standards and Safety Requirements:

Meets the Requirements of:

  • ASTM F1246-91
  • CSA C22.2 No. 601.1/601.2
  • UL 60601.1
  • EN/IEC 60601-1
  • EN/IEC 60601-1-2
  • EN/IEC 60601-2-12
  • EN 794-3
  • ISO 10651-2/3
  • EN/IEC 60601-1-6
  • EN/IEC 60601-1-8
  • Item #: B210-301
  • Manufacturer: General Electric
  • Condition: New

General Electric iVent 201

Price: $12,995.00
Availability: PLEASE CALL FOR PRICING
Reviews (0) Write a Review
No Reviews. Write a Review